Have you ever encountered a stubborn non removable pin hinge that just won’t budge? It can be incredibly frustrating and time consuming. But don’t despair! This article will show you how to easily remove even the most stubborn of non removable pin hinges. We’ll cover everything from the tools you need, to the step-by-step process for removal. So what are you waiting for? Let’s get started on this easy fix!
What is a Non-Removable Pin Hinge?
A non-removable pin hinge, also known as a “barrel” or “mortise” hinge, is one of the most popular types of hinges used in furniture and cabinetmaking. It consists of two parts: a barrel and a pin. The barrel is usually made of brass or steel and contains an internal spring mechanism that keeps the pin in place. The pin can be removed from the barrel by pressing down on it with a flathead screwdriver. This makes it difficult to remove the hinge without damaging it.
Reasons You May Need to Remove a Non-Removable Pin Hinge
There are several reasons why you may need to remove a non-removable pin hinge. If your furniture or cabinets are damaged or if you’re replacing them, then you’ll need to remove the existing hinges first. You may also need to remove the hinge if you want to replace it with a different type of hinge or adjust its position. Finally, if you’re refurbishing furniture or cabinets, then you’ll need to remove the old hinges before you can install new ones.
How to Remove a Non-Removable Pin Hinge
Removing a non-removable pin hinge can be tricky because the pin is held in place by a spring mechanism. However, there are a few methods you can use to get the job done safely and without damaging the hinge. Here’s what you need to do:
Step 1: Prepare Your Tools
Before attempting to remove the hinge, make sure you have all the necessary tools ready. You’ll need a flathead screwdriver, needle nose pliers, a hammer, and a drill bit (if needed). Make sure the drill bit is the same size as the pin so it fits snugly in the hole.
Step 2: Unscrew the Barrel
The next step is to unscrew the barrel from the frame or surface where it’s attached. Use the flathead screwdriver to loosen the screws until they come out easily. Be careful not to damage the screws when doing this. Once the screws are out, you should be able to pull the barrel away from the surface.
Step 3: Pry Out the Pin
Now that the barrel has been removed, you can access the pin. Use the needle nose pliers to grip the pin and gently pull it out of the barrel. If the pin doesn’t come out easily, you may need to tap it lightly with a hammer. Once the pin is out, you can remove the hinge from the surface.
Step 4: Drill Out the Pin Hole (Optional)
If you plan to reuse the hinge, then you may need to drill out the pin hole. To do this, insert the drill bit into the hole and slowly drill it out. Be careful not to damage the surrounding material. Once the hole has been drilled out, you can reinstall the hinge.
Tips for Removing a Non-Removable Pin Hinge
When removing a non-removable pin hinge, it’s important to take your time and be gentle. Don’t force the pin out or try to pry it out with a tool other than needle nose pliers. Also, make sure you have all the necessary tools before starting the job. And finally, if you’re drilling out the pin hole, make sure the drill bit is the same size as the pin so it fits snugly in the hole.
Removing a non-removable pin hinge can be tricky but with the right tools and technique, it can be done quickly and without damaging the hinge. Just remember to be patient and take your time while following the steps outlined above. With a little practice, you’ll soon be an expert at removing non-removable pin hinges.
Say Goodbye to Stubborn Pin Hinges – Here’s How!
- Remove the screws
- that are holding the pin hinge in place. Make sure you use the right size of screwdriver for this step.
- Pry off the pin
- using a flathead screwdriver or another prying tool. You may need to use some force to get it off.
- Clean off any residue
- left behind from the pin hinge, such as glue or paint.
- Sand down the area
- where the pin hinge was located so that it is smooth and even.
- Fill in the holes
- with wood putty or other filler material. Allow the filler to dry before proceeding.
- Repaint or refinish
- the surface if necessary.
- Install a new pin hinge
- if desired. Follow the manufacturer’s instructions for installation.
And That’s How You Take Out a Non-Removable Pin Hinge!
So there you have it – a complete guide on how to remove a non removable pin hinge. You now know the best way to do this is by using a drill and a screwdriver, as well as other tools such as pliers and a hammer. It’s important to take your time with this process and to be careful not to damage any of the surrounding components. And if all else fails, don’t forget that you can always contact a professional for help.
Good luck!
Q&A
You’ll need a drill, screwdriver, and some WD-40 or other lubricant. Good luck!
Check the product specifications – most manufacturers will list whether or not a hinge is removable. Look for screws or other fasteners on the hinge itself. If it’s a single piece, then it’s probably not removable.
- Try using a flathead screwdriver to pry it off gently.
- If that doesn’t work, you can try using WD-40 or other lubricant to loosen it up.
- If all else fails, it might be time to call in a professional!
Yes, you can! It depends on the type of hinge you’re looking for, but there are lots of options out there. Have a look around and find one that suits your needs. Good luck!
